ujk technology Parf MK II Bedienungsanleitung Seite 2

CONTENTS
UK
Introduction
PGS Identification of Parts
The Concept
Using the 3mm Drill Guides
Using the 3mm Pins
Initial Pattern of 3mm Holes
Completing the Pattern of 3mm Holes
Creating Offset Holes
Enlarging the 3mm Holes to 20mm
Useful Tips
INTRODUCTION
The UJK Parf Guide System (PGS) has been designed by Peter
Parfitt and developed jointly with Axminster Tools & Machinery
Ltd who manufacture the system under the UJK brand name.
The PGS provides a highly accurate, yet quick and easy method
of laying out a pattern of 20mm holes in a bench top or the
surface of a track saw cutting station. With a pair of UJK Super
Dogs and at least two UJK Guide Dogs or Pups you will be able
PGS IDENTIFICATION OF PARTS
A
B
C
Figure 1
Pair of Parf Sticks; 1m long with metric ruler
A
graduations and a series of 6mm holes
B Bearing guided 3mm Drill Guide; short spigot
C
20mm Guide Block
Bearing guided 3mm Drill Guide; long spigot
D
Set of 3mm Guide Pins
E
D
E
to make perfect right angle or 45 degree cuts with either a
guide rail and track saw or straight edge and circular saw.
The PGS also provides an easy way to create an Isometric
pattern of 20mm holes that then allows the user to make
perfect 30 degree and 60 degree cuts.
G
F
PGS Components
3mm Drill Holder with 3mm drill
F
Special D/G 20mm TCT drill with hex shank
G
and 3mm centre guide spike with stop collar
Joining Screw for fixing Parf Sticks together
H
I
Parf Locator Dogs
UJK Parf Dust Port
J
2
I
H
J
02
02
03
03
03
04
05-06
07-08
09
10