Programming The Timer - RainPoint ITV201P Bedienungsanleitung

PROGRAMMING THE TIMER

STEP 0: UNDERSTANDING ZONES
This is a two-zone timer allowing you to water two different areas from
the same faucet. Each zone can be programmed with independent start
time, how long, and how often.
Note: Dual zones operating simultaneously have lower water pressure
than single zone because the water pressure is divided between the
two zones.
Please design the program separately for each ZONE:
1）First, keep ZONE L and complete the settings, following the steps
1-4 below. Then turn the dial to "ON" to save the changes.
2）Press "ZONE" button to select ZONE R, and follow steps 2-4 to set up.
Turn the dial to "ON" to save all the plans.
- 07 -