Before Use; Timer Function; Oscillation Function - Taurus Boreal Digital No-Moskit Gebrauchsanleitung

Downloaded by: pd-oliana on 04-04-2023 14:43 CEST
ASSEMBLING THE GRILL AND THE PROPE-
LLER: (FIG 2)
- Fit the rear grill on the motor housing, mat-
ching their fitting points.
- Tight the grill nut that attaches the grill, Make
sure of a correct setting.
- Fit the propeller on the motor shaft.
- Tight the nut that attaches the propeller,
Make sure of a correct setting.
- Check the correct rotation of the propeller.
- Fit the front grill front the rear grill,
- Fix the front grill turning around its fixing belt
and tight the security screw by using a screw-
driver.
INSTRUCTIONS FOR USE

BEFORE USE:

- Make sure that all products' packaging has
been removed.
- Prepare the appliance according to the
function you wish to use:
USE:
- Extend the cable completely before plugging.
- Connect the appliance to the mains.
- Guide the appliance to direct the flow of air in
the desired direction.
- Turn the appliance on, by using the on/off
button (22C).
- Select the appliance function desired.
- Select the desired speed (P1, P2, P3).
FAN FUNCTION:
- Select the fan position.
- Select the desired ventilation speed.
Mode
Constant speed at the adjusted level
The night mode is like the natural mode and, starting from the selected start speed, it
automatically switches between the levels. After about 30 minutes, the fan changes to
the next lower speed level. Once it reaches the lowest level, it remains in this mode
until the device is turned off by the sleep timer or manually.
The device changes the speed at intervals depending on the selected starting speed,
thereby producing pleasant and natural air circulation.
MANUAL FA0008_Boreal No-moskit.indb 8 MANUAL FA0008_Boreal No-moskit.indb 8
MODES
- Press" Mode" to set the Choose between the
following modes "Normal / Nature/ Sleep"

TIMER FUNCTION:

- The appliance's operating time can be con-
trolled, 0.5-7.5H.
- To program the operating time simply select it
using the timer (22, B) button.
- The time programmed or remaining time will
appear on the display (19).
- After the selected time the appliance will
switch off automatically.

OSCILLATION FUNCTION:

- The oscillation function makes it possible to
direct the flow from the apparatus so that it
automatically alternates over a range of 75º.
- To activate this function, press the (22, D)
OSC button.
- To deactivate this function, follow the proce-
dure for switching it on in reverse.
THE ECO FUNCTION
- When the ambient temperature is less tan
26°C, the fan runs on 1=low speed; When the
ambient temperature between 26 to 29°C,
the fan runs on 2=middle speed; When the
ambient temperature is more than 30°C, the
fan runs on 3=high speed. Press ECO button
again, ECO function off.
MOS/ MOSQUITO KILLER"
- Push button (22, F) to activate/ inactivate the
mosquito killer function.
- Install mosquito repellent (Fig 3)
- 1.Please purchase a suitable repellent
- 2.please Install the mosquito repellent as di-
rected
Function
30/12/2022 13:39:06 30/12/2022 13:39:06