Abbildung 400. Kabelführung zu einem 8i RAID/HBA-Adapter
Von
Rückwandplatine 1: SAS 0, SAS 1
1
12 x 3,5-Zoll-SAS/SATA-Rückwandplatine
Dieser Abschnitt enthält Informationen zur Kabelführung für das Servermodell mit einer vorderen 12 x
3,5-Zoll-SAS/SATA-Rückwandplatine.
•
„Vordere Rückwandplatine: 12 x 3,5-Zoll-SAS/SATA" auf Seite 368
•
„Vordere + hintere Rückwandplatinen: 12 x 3,5-Zoll-SAS/SATA + 4 x 2,5-Zoll-/2 x 3,5-Zoll-/4 x 3,5-Zoll-
SAS/SATA" auf Seite 370
•
„Vordere + mittlere Rückwandplatinen: 12 x 3,5-Zoll-SAS/SATA + 4 x 3,5-Zoll-/4 x 2,5-Zoll-SAS/SATA/8 x
2,5-Zoll-NVMe" auf Seite 374
•
„Vordere + mittlere + hintere Rückwandplatinen: 12 x 3,5-Zoll-SAS/SATA + 4 x 3,5-Zoll-SAS/SATA + 4 x
3,5-Zoll-SAS/SATA" auf Seite 380
Vordere Rückwandplatine: 12 x 3,5-Zoll-SAS/SATA
Dieser Abschnitt enthält Informationen zur Kabelführung für das Servermodell mit einer vorderen
Rückwandplatine für 12 x 3,5-Zoll-SAS/SATA-Laufwerke.
•
„Integrierte Anschlüsse" auf Seite 369
368
ThinkSystem SR650 V3 Hardware-Wartungshandbuch
Zu
8i Adapter
• Gen 4: C0
• Gen 3: C0C1