Abbildung 329. Kabelführung der mittleren Rückwandplatine
Von
1
• Rückwandplatine 5: SAS
• Rückwandplatine 6: SAS
2
• Rückwandplatine 5: PWR
• Rückwandplatine 6: PWR
Vordere + mittlere + hintere Rückwandplatinen: 24 x 2,5-Zoll-SAS/SATA + 8 x
2,5-Zoll-SAS/SATA + 4 x 2,5-Zoll-/8 x 2,5-Zoll-SAS/SATA
Dieser Abschnitt enthält Informationen zur Kabelführung für die vordere 12 x 3,5-Zoll-SAS/SATA-
Rückwandplatine, zwei mittlere 4 x 2,5-Zoll-SAS/SATA-Rückwandplatinen und eine hintere 4 x 2,5-Zoll-/8 x
2,5-Zoll-SAS/SATA-Rückwandplatine.
Informationen zum Anschließen der Netzkabel für die vordere(n) Rückwandplatine(n) finden Sie unter
„Rückwandplatinen: Servermodelle mit 2,5-Zoll-Laufwerkpositionen an der Vorderseite" auf Seite
Zum Anschließen von Signalkabeln an die vordere(n) Rückwandplatine(n) beachten Sie je nach
Serverkonfiguration die folgenden Kabelführungsszenarien.
•
„24 x 2,5-Zoll-SAS/SATA + 8 x 2,5-Zoll-SAS/SATA + 4 x 2,5-Zoll-SAS/SATA" auf Seite 315
•
„24 x 2,5-Zoll-SAS/SATA + 8 x 2,5-Zoll-SAS/SATA + 8 x 2,5-Zoll-SAS/SATA" auf Seite 324
314
ThinkSystem SR650 V3 Hardware-Wartungshandbuch
Bis
16i Adapter
• Gen 4: C1
• Gen 3: C2C3
• Integriert: Stromversorgung für Rückwandplatine
• Integriert: Seitenband für Rückwandplatine
• Adapterkarte 1: PWR
246.