Abbildung 304. Kabelführung der hinteren Rückwandplatine
Von
Rückwandplatine 4: SAS
1
Rückwandplatine 4: PWR
2
24 x 2,5-Zoll-SAS/SATA + 8 x 2,5-Zoll-SAS/SATA
Dieser Abschnitt enthält Informationen zur Kabelführung für die vordere 24 x 2,5-Zoll-SAS/SATA-
Rückwandplatine und einer hinteren 8 x 2,5-Zoll-SAS/SATA-Rückwandplatine.
Informationen zum Anschließen der Netzkabel für die vordere(n) Rückwandplatine(n) finden Sie unter
„Rückwandplatinen: Servermodelle mit 2,5-Zoll-Laufwerkpositionen an der Vorderseite" auf Seite
Zum Anschließen von Signalkabeln an die vordere(n) Rückwandplatine(n) beachten Sie je nach
Serverkonfiguration die folgenden Kabelführungsszenarien.
•
„32i RAID/HBA-Adapter" auf Seite 296
•
„16i RAID/HBA-Adapter" auf Seite 297
•
„CFF Expander + 8i/16i RAID/HBA-Adapter" auf Seite 301
•
„CFF 16i RAID/HBA + SFF 16i RAID/HBA-Adapter" auf Seite 299
•
„CFF 16i RAID/HBA-Adapter + CFF Expander" auf Seite 303
Zu
CFF Expander
• C3
Integriert: Netzteilanschluss der 7-mm-Rückwandplatine
Kapitel 2
246.
.
295
Interne Kabelführung