ecoQ CoolAir 16+ Benutzerhandbuch Seite 98

C. Drying Your Room
$ Press MODE button repeatedly on the control panel until the LED of DRY operation
lights up. The fan speed is not selectable. A hose with 14 mm inner diameter must
be connected to the drain outlet at the back of the unit.
p Note: In this mode, the fan speed switches over to low speed and the
temperature cannot be selected.
D. Sleep Mode
The sleep mode can only be activated when in COOL mode.
W In COOL mode: After 1 hour the preset temperature is increased by 1 °C, after
another hour the preset temperature will again be increased by 1 °C.
5.4.3 Information on the ecofort App
The "ecofort" app is available for free on Android and iOS.
Scan the QR code to get directly to the download.
How to Use the App
This appliance allows you to operate the unit via your home
network. A prerequisite is a permanent Wi-Fi connection to your
router and the "ecofort" app.
Install the "ecofort" app and create a user account.
1.
2. Activate the Wi-Fi function by long pressing the timer button
on the unit.
3. Place the unit within range of your router.
4. As long as the power is turned on, the Wi-Fi indicator flashes.
After 3 minutes, the status will be canceled if there is no
network configuration and the indicator light goes off. If you
need to re-connect the Wi-Fi, long press the "timer" button
for 5 seconds to re-start the network configuration, the Wi-Fi
indicator flashes again.
96 | Owner's Manual ecoQ CoolAir 16+