6. Maintenance
No routine or extraordinary maintenance is necessary except periodically cleaning.
Cleaning
Disconnect the unit from the power supply and use a cloth dampened with a non-flammable non-aggressive detergent.
Repair
Repairs must be carried out by authorized Velp personnel only.
The instrument must be transported using the original shockproof packaging when freight forwarders, couriers or other are
taking care of the unit transport. Follow the indications on the original packaging (e.g. place the instrument on a pallet).
It is the responsibility of the user, to properly decontaminate the unit in case of hazardous substances remaining on the surface
or interior of the device. If in doubt about the compatibility of a cleaning or decontamination product, contact the manufacturer
or distributor.
7. Technical data
Model
Voltage
Power input
Dimensions (WxHxD)
Weight
Number of holes, diameter
Temperature range
Time range
Construction material
Thermoregulation
Working in continuous
Heating block temperature stability and
homogeneity
Temperature precision
Noisiness
Environmental temperature admitted
Storage temperature admitted
Max humidity
Overvoltage category
Pollution degree CEI EN61010-1
ECO 6
F10100120
F10110120
230 V
115 V
50/60 Hz
50/60 Hz
700 W
198x132x319 mm
5.6 kg
6 x 42 mm
10 ÷ 200 °C
Epoxy painted metal structure
PID microprocessor
4
ECO 16
F10100126
230 V
50/60 Hz
550 W
168x110x269 mm
3.8 kg
14 x 42 mm + 2 x 22 mm
10 ÷ 165 °C
1 ÷ 999 min
Admitted
± 0.5 °C
± 1 °C
<< 80 dBa
+5...+40 °C
-10...+60 °C
80%
II
2
F10110126
115 V
50/60 Hz