Example Configuration; Setup - Beijer Electronics X-Key 16 Handbuch

2.3

Example Configuration

Operator terminal
RS422
Controller
The stations are configured according to the table below. The settings made are
indicated by the corresponding LEDs. For configuration instructions, see
chapter 3

Setup.

Station
Keyboard
number
Station 1 1*
Station 2 2 (F16 + F2) 38,400 bps*
* Default setting
If two additional extended keyboards are added, configure the station numbers
3 and 4 in the same way as Station 2.
Beijer Electronics, MA00827A
X-Key 16, station 1
RS232C (CAB21)
Communication
speed
38,400 bps*
X-Key 16, station 2
RS485
Communication
port
RS232C*
RS485 (F16 + F15) Disabled*
Configuration
Pass through
messages
Enabled (F16 + F7)
9