Safety Precautions; During Installation - Beijer Electronics X-Key 16 Handbuch

Safety Precautions

General
– Read the safety precautions carefully.
– Check the delivery for transportation damage. If damage is found, notify the
supplier as soon as possible.
– The product fulfills the requirements of article 4 of EMC directive
89/336/EEC.
– Do not use the product in an environment with high explosive hazards.
– The supplier is not responsible for modified, altered or reconstructed
equipment.
– Use only parts and accessories manufactured according to specifications of
the supplier.
– Read the installation and operating instructions carefully before installing,
using or repairing the product.
– Never pour fluids into any openings in the product. This may cause fire or
electrical shock.
– Only qualified personnel may operate the product.

During Installation

– The product is designed for stationary installation on a plane surface.
– Put the product on a stable surface during installation. Dropping it or letting
it fall may cause damage.
– Install the product according to the accompanying installation instructions.
– Ground the product according to the accompanying installation
instructions.
– Only qualified personnel may install the product.
– Separate the high voltage, signal and supply cables.
– Make sure that the voltage and polarity of the power source is correct before
connecting the product to the power outlet.
– Do not place the product where it might be exposed to strong magnetic fields.
– Do not install the product in direct sunlight.
– Peripheral equipment must be appropriate for the application.
Beijer Electronics, MA00827A
Safety Precautions