Beijer Electronics X-Key 16 Handbuch Seite 2

Manual for X-Key 16
Foreword
This manual describes installation and functions of the extended function
keyboard X-Key 16.
All configuration of the extended function keyboard is made with Information
Designer, version 1.21 or higher.
It is assumed that the reader of this manual is familiar with the EXTER-series
concept.
For basic information about using function keys and LEDs, we refer to the man-
uals for the operator terminals and for the configuration tool for the operator
terminals.
© Beijer Electronics AB, MA00827A, 2006-12
Please read the entire installation manual prior to installing and using this equipment. Only qualified
personnel may install, operate or repair this equipment. Beijer Electronics AB is not responsible for
modified, altered or renovated equipment. Because the equipment has a wide range of applications, users
must acquire the appropriate knowledge to use the equipment properly in their specific applications.
Persons responsible for the application and the equipment must themselves ensure that each application is
in compliance with all relevant requirements, standards and legislation in respect to configuration and
safety. Only parts and accessories manufactured according to specifications set by Beijer Electronics AB
may be used.
BEIJER ELECTRONICS AB SHALL NOT BE LIABLE TO ANYONE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE INSTALLATION, USE OR REPAIR OF THIS EQUIPMENT, WHETHER ARISING IN
TORT, CONTRACT, OR OTHERWISE. BUYER'S SOLE REMEDY SHALL BE THE REPAIR,
REPLACEMENT, OR REFUND OF PURCHASE PRICE, AND THE CHOICE OF THE
APPLICABLE REMEDY SHALL BE AT THE SOLE DISCRETION OF BEIJER ELECTRONICS AB.
Beijer Electronics, MA00827A
Foreword