Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance; Defrosting; Replacing The Light Bulb - Atlantic ATLKGK180W10E Bedienungsanleitung

Kühl-gefrierkombination
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
5 CLEANING AND
MAINTENANCE
Disconnect the unit from the power
supply before cleaning.
Do not wash your appliance by
pouring water on it.
Do not use abrasive products,
detergents or soaps for cleaning the
appliance. After washing, rinse with clean
water and dry carefully. When you have
finished cleaning, reconnect the plug to the
mains supply with dry hands.
• Make sure that no water enters the lamp
housing and other electrical components.
• The appliance should be cleaned
regularly using a solution of bicarbonate
of soda and lukewarm water.
• Clean the accessories separately by
hand with soap and water. Do not wash
accessories in a dish washer.
• Clean the condenser with a brush at least
twice a year. This will help you to save on
energy costs and increase productivity.
The power supply must be
disconnected during cleaning.

5.1 Defrosting

• Your appliance performs automatic
defrosting. The water formed as a
result of defrosting passes through
the water collection spout, flows into
the vaporisation container behind your
appliance and evaporates there.
• Make sure you have disconnected the
plug of your appliance before cleaning
the vaporisation container.
• Remove the vaporisation container from
its position by removing the screws as
indicated. Clean it with soapy water at
specific time intervals. This will prevent
odours from forming.

5.2 Replacing the Light Bulb

Important note: Unplug the unit from
the power supply before start the
process.
1
1. Press the hooks on light cover. (Fig. 1)
2. Open the light cover towards arrow when
top hooks pull out from housing. (Fig. 2)
3. Pull out the cover towards arrow remove
it. (Fig. 3)
4. Turn the light bulb counter clockwise and
remove it. (Fig. 4)
5. Change the present light bulb with a new
one of not more than 15 W. (Fig. 4)
6. Implement the steps in reverse order.
7. After waiting 5 minutes, plug the unit.
Replacing LED Lighting
If your appliance has LED lighting
contact the help desk as this should
be changed by authorized personnel only.
EN - 42
2
4
3

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

101701120010280131

Inhaltsverzeichnis