Peg Perego Pliko P3 Modular e Gebrauchsanleitung Seite 23

the front hooks A and the rear hooks B and C. The
figure shows the basket fitted in position.
6• DRINK HOLDER: This can be fitted on the left
hand side or on the right hand side of the stroller,
thanks to the clip provided on both sides of the
chassis. To fit the drink holder, push it down until it
clicks into place (Fig. a).
ADJUSTING THE HANDLES: the handles are height
adjustable in two positions. For the high position
press the button and at the same time pull the
handle upwards. To lower the handle, do the
opposite (Fig.b).
7• BRAKE: to apply the stroller brakes, lower the
levers on the rear wheels with your foot (Fig.a). To
release the brakes, do the opposite.
When stationary, always apply the brakes.
SWIVEL WHEELS: to allow the front wheels to
swivel (Fig.b), lower the lever as shown with arrow
1. To stop them swivelling, push the lever in the
opposite direction as shown with arrow 2.
GANCIOMATIC SYSTEM:
Pliko P3 chassis version
Ganciomatic is the quick and practical system that
allows you to attach the Navetta XL or the Primo
Viaggio tri-fix es car seat to the Ganciomatic Base
of the stroller in a single movement.
Rest the item on the Ganciomatic base and press
with both hands until it clicks into position.
Always apply the chassis or stroller brake
before attaching or removing the items (see the
respective instruction manuals).
Check that the child transport element is correctly
attached.
8• CHASSIS GANCIOMATIC FASTENERS: to raise the
Ganciomatic connectors on the chassis, pull the
lever outwards and at the same time swivel the two
connectors upwards until they click (fig_a).
To lower the chassis Ganciomatic fasteners, pull
the lever outwards and at the same time turn the
fasteners downwards (fig_b).
PLIKO P3 + Navetta XL:
To attach the Navetta XL to the Pliko P3 in chassis
format:
- Apply the Pliko P3 brakes.
- Raise the Ganciomatic fasteners.
9• Turn the two levers at the rear of the chassis
outwards (fig_a).
Raise the chassis footrest to the highest position
(fig_b).
1 0• The Pliko P3 chassis version is now ready for the
attachment of a Navetta XL bassinet unit.
Take hold of the handle of the Navetta XL and
place it on the Ganciomatic connectors of the
chassis, with the head end of the Navetta XL on
the opposite side to the handles of the chassis.
- Press on the sides of the Navetta XL with both
hands until it clicks into place.
- To see how to release the Navetta XL from the
P3Modular&P3OnTrackModular-EU_FI23 23
All manuals and user guides at all-guides.com
chassis and for further information, consult its user
manual.
PLIKO P3 + Primo Viaggio tri-fix es:
To attach the car seat to the chassis:
- Apply the Pliko P3 brakes.
- It is important not to remove the stroller front bar
when attaching the car seat (to attach the front bar
see point 32).
1 1• The Pliko P3 in chassis format is ready for the
Primo Viaggio tri-fix es car seat to be attached.
Grip the handle of the car seat and position it
on the Ganciomatic fasteners of the chassis,
positioning the head end of the car seat on the
opposite end to the chassis handles. Press the
sides of the car seat with both hands until it clicks
into position.
- To see how to release the
from the chassis and for further information, consult
its user manual.
TO CONVERT
THE CHASSIS INTO A STROLLER
1 2• ASSEMBLY: to convert the Pliko P3 chassis version
into a stroller, check that the two levers are
lowered (fig_a).
Position the backrest with the cover on the chassis
seat (fig_b).
1 3• To attach the backrest to the chassis (fig_a) insert
the two ends, pressing the two buttons, into the
chassis seat, as shown in figure 1, until they click
into position, as shown in figure 2.
To attach the back adjustment bar to the chassis
(fig_b), rotate the attachment upwards (figure 2,
as shown by the arrow) and position it behind the
rear upright.
• Push the two fasteners down until they click into
position in the seats in the rear uprights (fig_c).
1 4• To fit the stroller covers, fasten the cover fasteners
to the armrests, as indicated by the arrows (fig_a).
Insert the leg rest levers in the fabric covering (fig_b).
• Finally, attach the cover to the chassis (fig_c),
fasten the cover buttons to the base, indicated in
the figure with the number 1. Pass the lower leg
divider strap under the seat, indicated in the figure
with the number 2, leaving the upper leg divider
strap over the cover.
OPENING AND CLOSING: to open the Pliko P3 stroller
version, repeat the operations in points 1 and 2.
To fold up the Pliko P3 in stroller format, raise the
backrest and repeat the steps in points 35 and 36.
GANCIOMATIC SYSTEM:
Pliko P3 stroller version
Ganciomatic is the quick and practical system that
allows you to attach the Navetta XL or the Primo
Viaggio tri-fix es, which are also equipped with
the Ganciomatic system, to the Pliko P3 in stroller
format, thanks to its Ganciomatic connectors.
1 5• THE STROLLER GANCIOMATIC FASTENERS: to raise
- 23 -
Primo Viaggio tri-fix es
11-02-2010 17:12:48