KLASS Fan BIG COOL Anleitung Seite 26

Pair your remote
When you connect your fan to the network for the first 30 seconds, a pairing
channel is opened.
To pair your fan, press and hold the power button for 5 seconds in the 30 second
period.
The fan responds with a long beep. Your fan is now paired.
OPERATION
1) On / Off:
Press to switch on/off the fan.
2-3) Speed:
The fan has 6 speeds. The default speed of the fan is 3. Adjust the fan to the
desired speed with buttons "-" and "+".
4-5) Speed/Timer LED indicators:
Light illuminates to show the correspondant funtion on. The indicators will turn
off after a few seconds, to extend the life of the battery. Press the fan speed
adjustment button to check the speed or timer seting.
6) Timer:
Press to select the operating time until it turn off (1h, 2h, 4h, 8h).
7) Light:
Press to turn on / off the light.
8) Summer/Winter
Attention! Do not change to one of these functions while the fan
is still rotating, this can severely damage it.
The summer /winter function allows you to change the direction of rotation of
your fan.
To do this, wait for your fan to stop completely, then press the direction button,
and select a speed.
You will not feel the moving air under the fan anymore, because the air is
now circulating to the top of the room, which allows to homogenize the room
temperature without having direct air flow.
24