Control Panel; Controls - ProBreeze PB-12 Bedienungsanleitung

CONTROL PANEL

― ―
1. Mist level button
2. Timer button
3. Warm mist button
4. Night mode button
5. Mood light button
6. Auto mode button
7. Power button

CONTROLS

― ―
Power Button
Turn the appliance on and off.
Mist Level Button
Select between low, medium, and high mist levels.
Timer Button
Set a turn-off timer for 1 to 12 hours. Setting a turn-off timer:
1. Ensure the appliance is plugged in and the power socket turned on.
2. Press the power button to turn the appliance on.
3. Press the timer button repeatedly or press and hold to set the desired time (1 to 12
hours) until turn-off.
4. The time digits will stop blinking and the timer indicator will illuminate showing that a
turn-off timer has been set.
8 of 76 | English
5. The LED display will switch between showing the room temperature and the number
of hours until turn-off.
6. Select the desired settings prior to turn-off.
7. To cancel the turn-off timer press the timer button repeatedly or press and hold until
the timer indicator shows "00" or turn the appliance off.
The appliance will automatically turn off once the turn-off timer ends.
Warm Mist Button
Turn the warm mist function on and off.
The appliance will take 15 minutes to warm up before producing warm mist.
Caution: The warm mist produced is (44°C). Do not place exposed skin over the 360° mist outlet
while using the warm mist function.
Night Mode Button
Turn the night mode function on and off.
When in night mode the LED display and control panel backing lights are turned off and only the
night mode button is illuminated in low-level brightness.
Mood Light Button
Turn the appliances blue LED mood light on and off.
When the mood light is on the LED display and control panel backing lights are illuminated in
low-level brightness.
Auto Mode Button
Set the desired humidity level at 45% RH, 55% RH, 60% RH, or 75% RH. Setting the desired humidity
level:
1. Ensure the appliance is plugged in and the power socket turned on.
2. Press the power button to turn the appliance on.
3. Press the auto mode button repeatedly to set the desired humidity level between 45% RH
and 75% RH.
4. The relative humidity digits will stop blinking and the room humidity indicator will illuminate
showing that the appliance is operating in auto mode.
5. The LED display will show the current room humidity.
6. Once the room humidity level reaches the set humidity level the mist output will
automatically stop. The mist output will start again once the room humidity level falls below
the set humidity level.
7. To turn auto mode off press the auto mode button repeatedly until the room humidity
indicator shows "- -" or turn the appliance off.
English | 9 of 76