Device Components; Technical Data - Navkom Touchpad Bedienungsanleitung

DEVICE COMPONENTS

The keypad:
Touch-sensitive
keypad
Illuminated
dial
Two function
keys
18
EN EN
Option1: Control unit: Option 2: DIN control unit:
Mounted in electrical box.
Is mounted inside the
door leaf, next to the
cable transfer.
Buttons 1 and 2 don't
have a function.
Button »R«
for factory reset.
Button »R« on position 10
for factory reset.
Option 3: Mini control unit BBX:
Button »R« for factory reset is located below the connector.
BEFORE THE FIRST USE OF YOUR KEYPAD READER, IT IS RECOMMENDED TO RESET TO FACTORY SETTINGS (Test Function
remains on for 1 minute).
ONCE THE KEYPAD IS RESET, IT IS RECOMMENDED TO IMMEDIATELY ENTER THE ADMINISTRATOR'S FINGERPRINTS.
IF THERE IS NO ACTIVITY WITHIN 8 MINUTES AFTER CONNECTING THE KEYPAD, IT DEACTIVATES AUTOMATICALLY TO
PREVENT UNAUTHORISED PERSONS FROM CONNECTING. IN THIS CASE, TURN OFF THE KEYPADPOWER SUPPLY FOR MIN. 5
SECONDS (THE EASIEST WAY TO DO THIS IS TO TURN OFF THE FUSE), THEN TURN THE KEYPAD POWER SUPPLY ON AGAIN. IT
IS RECOMMENDED YOU RESET THE DEVICE.
IF IT IS IMPOSSIBLE TO ENTER THE ADMINISTRATOR CODE IMMEDIATELY AFTER CONNECTING THE KEYPAD, PLEASE
TURN OFF THE POWER OF YOUR KEYPAD UNTIL THE ADMINISTRATOR CODE IS ENTERED.
The device has its own Wi-Fi, which does not depend on the house Wi-Fi or other connections. Wi-Fi range is up to 5
m, depending on the device (phone) and door type. We connect the keypad to a smartphone using the X-manager
application, which is available in Google Play and the App store.

TECHNICAL DATA

Number of codes
Mounted inside the
door leaf.
Lenght of code
Supply voltage
Operating temperature range
Maximum ambient humidity
Connection to the control unit
User interface
Control
Relay exits
100, of which 1 is an administrator code
optional, from 4 to 16 characters
5 V, DC
-20 ºC to +60 ºC
up to 100 % IP65
256-bit, encrypted
Capacitive illuminated keys
Analogue/App control
2 (BBX - 1)
19
EN EN