Navkom Touchpad Bedienungsanleitung Seite 13

* This step is not available with the BBX control unit
CHOOSE THE RELAY*: RELAY 1: number 1 3 s.
PRESS 3 s
ADMINISTRATOR CODE
BOTH RELAYS: numbers 1 and 2 3 s.
BLUE IS FLASHING
(first code entered)
RAPIDLY.
ENTER ADMIN. CODE.
PRESS 3 s.
USER PRESS .
BLUE IS FLASHING
CODE GREEN + BEEP 1 s. BLUE
SLOWLY.
IS FLASHING RAPIDLY.
PRESS 5 s. ENTER ADMIN. CODE. PRESS .
DELETE USER
BLUE IS GREEN + BEEP 1 s. GREEN AND RED ARE
CODE
FLASHING. FLASHING ALTERNATINGLY.
ENTER ADMIN. CODE.
CHANGING
PRESS 5 s. PRESS .
ADMINISTRA- BLUE IS GREEN + BEEP 1 s.
TOR CODE FLASHING. GREEN AND RED ARE
FLASHING ALTERNATINGLY.
PRESS AND 10 s.
DELETE ENTIRE ENTER ADMIN. CODE
BLUE + RED ARE FLASHING
BASE AND PRESS .
ALTERNATINGLY.
ENTER
UNLOCKING THE GREEN + BEEP 1 s
YOUR CODE
DOOR THE DOOR UNLOCKS.
AND PRESS .
LIGHTING BLUE IS FLASHING AFTER 3 s (ignore
PRESS
MODE TURN and remain pressing the button),
20s.
OFF AFTER 15 s GREEN IS FLASHING.
24
EN EN
RELAY 2: number 2 3 s.
ENTER ADMIN. CODE
4 - 16 NUMBERS.
GREEN + BEEP 1 s.
PRESS 1 s.
BLUE IS FLASHING SLOWLY.
* This step is not available with the BBX control unit
CHOOSE THE RELAY*: RELAY 1: number 1 3 s.
ENTER USER CODE
RELAY 2: number 2 3 s.
4 - 16 NUMBERS.
BOTH RELAYS: numbers 1 and 2 3 s.
PRESS 1 s.
GREEN + BEEP 1 s.
BLUE IS FLASHING SLOWLY.
ENTER USER CODE YOU
GREEN + RED + BEEP 3 X 1 s.
WISH TO DELETE.
USER CODE IS DELETED.
PRESS 1 s.
ENTER OLD ADMIN. CODE, ENTER NEW
PRESS 1 s. ADMIN. CODE
GREEN + BEEP 1 s.
4 - 16 NUMBERS.
BLUE IS FLASHING.
PRESS 1 s.
BLUE + RED + BEEP 5 X 1 s.
ENTIRE CODE BASE IS
DELETED.
SELECT LIGHTING MODE GREEN + BEEP 3 X 1 s.
TURN OFF AFTER 15 s: LIGHTING MODE TURNS OFF 15 s
PRESS 1 s. AFTER THE END OF EACH FUNCTION.
SELECT CONSTANT GREEN + BEEP 1 s.
LIGHTING: CONSTANT LIGHTING
PRESS 1 s. IS TURNED ON.
GREEN + BEEP 1 s
DESCRIPTION
THE CODE IS
SAVED.
The keypad does not react
to the touch of a finger.
GREEN + BEEP 1 s
THE CODE IS
SAVED.
The door does not open
after entering the code.
GREEN + BEEP 1 s.
I cannot see
NEW ADMIN. CODE
the illumination of the
IS SAVED.
keypad.
The red LED is on constantly.
I cannot enter a code.
The red LED is blinking
constantly.
ERROR DESCRIPTION AND ELIMINATION
CAUSE
You did not use enough of the finger's surface to press the key. The finger
must cover the entire digit.
You drew the finger to the key too slowly. The key must be pressed quickly.
If the device still does not react after several attempts, it is malfunctioning
and you should call a repairman.
You forgot to press after entering the code.
The code is incorrect.
The code has been deleted.
If the code is correct and after entering it a green LED lights up and a beep
goes on for 1s, the electric lock is malfunctioning. Call a repairman.
Illumination of the keypad is poorly visible under the strong light.
The device's illumination has been disabled. Press any key to turn on the
illumination.
The device has been turned off or is not plugged in.
The device is malfunctioning. Call a repairman.
The wrong code has been entered 3 times in a row and the keypad is tem-
porarily
locked.
The device is malfunctioning. Call a repairman.
25
EN EN