Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions; Product Description; Mounting The Device - Peiying PY-DVR005 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Owner's manual

SAFETY INSTRUCTIONS

Read this instruction manual and keep it for future reference. Producer
does not take responsibility for damages caused by inappropriate
handling and use of the product.
• Protect this device from humidity, water and other liquid. Avoid using/
storing it in extreme temperatures. Do not expose it to direct sunlight
and other sources of heat.
• This appliance may be used by children who are above 8 years old and
by persons with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, if they are supervised and guided by a
person who is responsible for their safety in a cautious manner for all the
safety precautions being understood and followed. Children should be
supervised to ensure that they do not play with the appliance. Children
should not perform cleaning and servicing of the device unsupervised.
• Keep the device out of the reach of children.
• Use only authorized accessories.
• Always disconnect the product from the power source before cleaning.
• Clean this device with a soft, slightly damp cloth. Do not use any
chemical agents to clean this device.
• Do not attempt to repair this device yourself. In case of damage,
contact authorized service point for check-up or repair.
• Turn off the device before ejecting SD card. Otherwise, data on the SD
card may be damaged or removed.

PRODUCT DESCRIPTION

1. Speaker
2. IR sensors
3. Camera lens
4. Holder socket
5. Micro USB socket
6. AV socket
EN
7. Reset button
8. MicroSD card slot
9. Power button
10.Up button
11. Down button
12.M button
10
Owner's manual
6
4
5
9
10

MOUNTING THE DEVICE

1. Put the suction cup holder into the holder socket in the dashcam.
2. Clean the mounting area (front windscreen), hold the suction cup
against the windscreen and lock the lever to secure it.
3. Plug one end of the car charger into the mini USB socket in the
dashcam, plug another end into the vehicle's cigarette lighter socket.
Note: Place the cable in a way, that it does not disturb the driver while
driving.
MicroSD card installation
1. Place the microSD card in the proper slot of the device (with pins
facing the screen) and press gently, until it clicks.
2. To take out the card, press it gently. When the card slides out of the
slot, take it out.
11
1
7
3
8
2
11
12
M
EN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis