Installing Instructions - Peiying PY0015 Bedienungsanleitung

Owner's manual
II. Instruction

1. Installing Instructions

• Shut down car engine.
• Insert the TF card into the slot of the device.
Caution: Suggesting using class 6 or above TF card for the car
DVR and memory no less than 512MB. The device support maxi-
mum 32GB TF card..
• Stick the DVR mounting frame on front window.
Caution: Please cleanse window before sticking mounting frame.
Dirt and trace of water have result in less time of usage. To adjust
mounting frame position, please use attached cotton thread, place
at the edge between sticker and window, pulling from left to right
and right to left until the sticker has been removed.
• Plug in car charger into the car cigarette lighter.
• Connect car charger to the Car DVR USB input with charging
Cable.
Caution: USB cable can be laid around front window.
• Place external camera at the back of the car, mind the direction of
the view of the camera. Cable can be laid across the seats to the
Car DVR at the front, connect external camera by plug the camera
AV cable into Car DVR AV-IN port.
• Adjust camera position, ensure the line of sight is perpendicular
to the ground.
• Starting engine, check if DVR has been installed correctly.
Caution: If DVR has been installed correctly, device will be ente-
ring video recording mode automatically when engine starts. Ple-
ase check with the screen display, if it is up side down, invert/non
invert the display with REC/MIC button.
EN
2. Operating Instructions
a) Automatically Recording Function
Start video recording automatically when engine turns on, video re-
cording indicator and audio recording indicator start flashes. After
engine been shut down, video recording stops automatically after
12 seconds, saving latest video and then power off. Recorded vi-
deos have been saved in TF card and loop recording earliest video
18