Hafele WT 300 Betriebsanleitung Seite 49

In the following graphics for commissioning, programming and operation, only the
WT 300 terminal is shown. The signal transmission of the WT 310 is identical.
Tag-it ™ISO
Prerequisites:
1. Switch on the power supply.

Acoustic signal is heard. LED flashes green
for max. 5 seconds.
3. Remove programming key card.

LED flashes red for max. 5 seconds.
Programming key card
2. Hold the programming key card in front of the
antenna during this 5-second period.

Acoustic signal is heard.
4. Hold the clearing key card in front of the
antenna during this 5-second period.

Acoustic signal is heard. LED illuminates
red.

System is in operation.
Tag-it ™ISO
Clearing key card
x
49