Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Figure B: ensure that the solar charger
is properly exposed to the sun and is re-
ceiving sufficient sunlight.
Optimal efficiency is achieved when the
sun's rays hit the solar cells 5 as per-
pendicularly as possible. Efficiency will
be reduced if the sun's rays hit the solar
cells 5 at a shallower angle.
6. How to use
6.1
Compatible devices
The solar charger can be used to charge mo-
bile devices that require a maximum charg-
ing current of 2.1 A.
Before charging, check the suitability ac-
cording to the technical specifications of
your mobile device (user instructions).
6.2
Charging external
devices
You can charge two mobile devices at the
same time, provided that the required charg-
ing current of both devices together does not
exceed 3 A. If necessary, refer to the instruc-
tions of the devices being charged for this in-
formation.
1. Connect the charger cable of your mo-
bile device to one of the two USB
ports 1 of the solar charger.
16 GB
2. During the charging process, you can
put your mobile device in the cover 4.
This is especially useful when the solar
charger is hung vertically, as the open-
ing of the cover 4 is always facing up-
wards and your mobile device cannot
fall out. This is not guaranteed when
the charger is hung horizontally or ly-
ing.
3. The charging process will start as soon
as the connection is established and
there is sufficient sunlight.
The LED 2 lights up as soon as there is
sufficient sunlight on the solar cells 5.
4. You can stop the charging process at
any time by disconnecting your mobile
device from the solar charger. You
should disconnect your mobile device
when it is fully charged.
7. Cleaning and storage
WARNING! Risk of material dam-
age!
Do not clean using sharp objects or
abrasive cleaning agents.
Solvents, spirits, thinners etc. must not
be used, as they can damage the sur-
face of the device
• Clean the device regularly with a slight-
ly damp cloth.
• If you do not use the device for a longer
period of time, fold it and secure it with
the hook-and-loop fastener 3.
• Store it in a place where neither intense
heat nor moisture can affect the device.
Werbung
Inhaltsverzeichnis
