Technical Data - Mennekes AMAXX Montage- Und Betriebsanleitung

Checks
Before each use
Evers 6 months *
*
In some cases, other test
deadlines are required based
on the application case.

Technical Data

Example of a identifi cation plate:
1
3
5
7
9
MENNEKES
Elektrotechnik GmbH & Co. KG
Aloys-Mennekes-Straße 1
D-57399 Kirchhundem
Check housing for any damage.
If you fi nd damage, commission an electrician with the repair of
the receptacle combination.
Damaged or missing fl ap lids and window must also be replaced
with new ones. Otherwise, the degree of protection is not
applicable.
Check the earth leakage circuit breaker
Set the switch toggle to "I" (Pos. 10)
Press the test switch (Pos. 11).
Then the switch toggle should independently jump to "0".
If this is not the case, the earth leakage circuit breaker must be
replaced. Contact an electrician for this.
**
If there is one
2
4
6
8
10
11
Tel. +49 (0) 27 23 / 41-1
Fax +49 (0) 27 23 / 41-2 14
info@MENNEKES.de
www.MENNEKES.de
**
(see P. 3, Pos. 9) as follows:
You will fi nd the most important
information about the AMAXX
combination on the type plate.
1 Part number
2 Degree of protection
3 Max. back-up fuse for the supply line
4 Permissible ambient temperature
range
5 Supply voltage
6 Rated conditional short-circuit current
7 Rated insulation voltage
8 Diversity factor
9 EMV environment
10 Unit norm
11 Production code
®
receptacle
17