Indu-Sol PROmesh B28-R Schnellstartanleitung Seite 9

Disassembling
the device Step 1
Turn off the power of the device.
Step 2
Adopt screw driver to loosen the 4 bolts fixed on the mounting lugs in the rack.
Step 3
Shift out the device from the rack, disassembling ends.
16
! WARNING Do not mount the PROmesh B28-R directly next to devices that generate strong electro-
magnetic interference fields or constantly emit heat to their surroundings. Also protect
the PROmesh B28-R from intense sunlight.
Power Supply
The PROmesh B28-R is provided with a redundant power supply. The connections are
additionally secured with a power button. Connect the PROmesh B28-R to the power
supply via the power supply adapter. Then switch on the device via the power switch.
! NOTE First, plug the power supply terminal block into the power supply connector of the
device. Then plug the power supply terminal block.
Power switch:"-" means power ON, „O" means power OFF.
If the external power supply is correctly connected and activated, all status LEDs of
the PROmesh B28-R will light up briefly. After a short initialization phase the LEDs go
out and the device is ready for operation and can now be configured in the network.
Download the Service Tool to your client PC (Windows). You can find the software at
Configuring a Network
the following link:
Connection
www.indu-sol.com/en/servicetool
! NOTE Our software is updated regularly. Please, make sure you are using the latest version.
Connect the PC to a suitable data line on one of the data ports (P1 – 28).
The PROmesh B28-R and the client PC must be located in the same IP address range
and IP subnet. For this you have to assign a corresponding IP address to your PROmesh
B28-R for the first time. Use the already installed ServiceTool.
After assigning a suitable IP address and subnet mask, the Web UI of the PROmesh
B28-R can be reached.
The PROmesh B28-R is delivered with the following factory settings:
ENGLISH
17