! WICHTIG
Weiterführende Informationen zu den Konfigurationsmöglichkeiten und zur Fehler-
behebung finden Sie unter:
www.indu-sol.com/handbuch-promesh
Werkseinstellung
Per Resetknopf ist es möglich, den PROmesh B28-R auf die Werkseinstellung zurück-
zusetzen. Achten Sie dabei, dass im Vorfeld die Konfiguration per Konfigurationsdatei
gesichert wurde.
Per Reset ist es auch möglich, den Benutzername und Passwort zurückzusetzen, sollte
dies nicht mehr auffindbar sein.
LED Anzeigen interpretieren
LED-Bezeichnung
PWR1
PWR2
Status
Alarm
Portstatus
10
Modus
Bedeutung
An
PWR ist angeschlossen unddas Gerätläuft normal
Aus
PWR ist getrennt oder das Gerät läuft nicht normal
An
PWR ist angeschlossen unddas Gerätläuft normal
Aus
PWR ist getrennt oder das Gerät läuft nicht normal
An
Das System läuft nicht normal
Blinkend
Das System funktioniert fehlerfrei
Aus
Das System startet nicht korrekt
An
Es liegt ein Alarm (Spannungsversorgung oder Portver-
bindung) vor
Aus
Es liegt kein Fehler vor.
An
Der Port hat eine gültige Netzwerkverbindung aufgebaut
Blinkend
Der Port befindet sich im Netzwerkkommunikationsaus-
tausch
Aus
Der Port hat keine gültige Netzwerkverbindung aufge-
baut
DEUTSCH
General Notes
! WARNING
Something's wrong with your
product?
Your system is at a standstill?
Commissioning and operation of this device may be carried out by qualified personnel
only. Qualified personnel are persons who are authorized to commission, ground
and label devices, systems and circuits in accordance with the standards of safety
engineering.
You can reach our technical support team on weekdays between 07:30 am – 04:30 pm
(CET) by telephone: +49(0)34491 / 581-14 or send us an e-mail: support@indu-sol.
com. We will get in touch with you promptly.
Reach out to our emergency service even outside our regular opening hours:
+49(0)34491 / 580-0.
Version 1.0 | Date: 13.01.2023 | Product Code: 114110100
Printed in Germany
This document is subject to change without notice.
© Copyright 2023 Indu-Sol GmbH
ENGLISH
11