Clearing Foil Jams; Cleaning And Servicing - Olympia A 8250 Bedienungsanleitung

Clearing Foil Jams

The laminator is provided with a REVERSE function in order to clear foil
jams quickly.
1 If the foil pouch jams, press the REVERSE button.
2 The foil pouch is released and is ejected through the insertion slot
(front).
3 It will probably be necessary to then clean the unit several times as
described in the Section "Cleaning and Servicing".
4 If foil jams occur repeatedly or jammed foil cannot be removed from
the laminator, please contact our hotline.

Cleaning and Servicing

Deposits and residual adhesive on the transport rollers can influence the re-
sults of the laminating process. Therefore, the transport rollers must be
cleaned periodically after use:
To do this, insert a folded piece of paper in the insertion slot. Residual adhe-
sive is removed and taken up by the paper when ejected. Repeat the proc-
ess several times.
Disconnect the power plug before starting to clean the unit with a damp
cloth. If necessary, the housing can be cleaned using a cloth moistened with
clean water with a little mild soap applied. Never use any solvents or ag-
gressive cleaning agents.
14