Safety Instructions - Teka HPL 870 Allgemeine Wartungs- Und Installationsanleitung

SAFETY INSTRUCTIONS

Read these instructions carefully to obtain the best
performance from your oven. Keep this manual so that
it can be read by a new owner.
Electrical safety
• In order to connect the oven to the mains, the
technician should use an H05SS-F power cable. The
connection diagram is shown in Figure 12.
• The oven must always have a good earth connection
in line with current regulations.
• Connection must be made by means of an omnipolar
switch that is suitable for the current drawn and with
a minimum aperture between contacts of 3 mm for
disconnection in case of emergency, cleaning or bulb
changing. Under no circumstances must the earth
wire pass through this switch.
• This switch may be replaced by a plug, provided it is
accessible for normal use.
• Any handling or repair to the appliance, including
replacement of the power cable, should be carried
out by authorised Technical Service Personnel using
original spare parts. Repairs or handling by others
may damage the appliance or cause malfunctioning
that could be hazardous to your safety.
• Unplug your oven if it malfunctions.
18
All manuals and user guides at all-guides.com