Installing The Heater - Qlima R 3224 X Gebrauchsanweisung

MANUAL
A

INSTALLING THE HEATER

B
C
D
4
64
Carefully remove your heater from the box and check the contents.
In addition to the heater you also need to have:
E these directions for use
Keep the box and the packaging materials (Fig. A) for storage and/or
transportation.
Remove the other packaging materials:
E Release the right side of the grill. Lift the grill from the slot (Fig. B) and pull
it forward.
E Pull both ends of the packaging to the sides and at the same time slightly
downwards (see Fig. C).
E Remove the combustion chamber from the heater and remove the
packaging underneath (see Fig. D).
E Put the combustion chamber back into its place. The combustion chamber
is positioned correctly when it can be smoothly moved a little to the left
and to the right by its handle E (Fig. F). Close the grill: Slightly lift it to
reposition it in its slot.
E Open the lid of the removable tank  and remove the piece of polyfoam.
Fill the removable tank as indicated in Section B.
Insert the batteries into their holder K at the back of the heater (Fig. G).
Ensure that the positive and negative poles match the + and - marks indicated
on the battery housing. Close the battery cover.
E Do not mix the + and the - pole
E Do NOT recharge non rechargeable batteries!
E Do NOT mix different types and brands of batteries, do NOT mix old and
new batteries"
E If the appliance is stored or not used for a longer period: always remove
the batteries
E Do NOT short circuit the electrical power supply terminals
E To remove the batteries: simply remove them from the battery enclosure
A
E E E E E E