Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATING INSTRUCTIONS
OF REMOTE CONTROL SL2392W USED
IN COMBINATION WITH "W" AND "M" RECEIVER SYSTEMS
Remote control SL2392W has 99 channels, therefore it can control up
to 99 receivers.
It features:
•
a display showing the channel number selected
•
two push-button controls marked with arrows
se and lower, and programming for the remote function.
•
two push-buttons for channel selection, marked by
•
a Reset push-button for immediate return of the indica-
ted channel to channel 00
Operation:
When the remote control display is turned off, press any key to activate
it; a 3-second animation will appear. To move the blind, press the
push-button throughout the duration of low speed, then release it
when high speed is activated.
To tilt the blind, slightly press the
To program the remote control, refer to the instructions enclosed to
"W" and "M" receiver systems. The remote control will turn off after 30
seconds of inactivity.
Battery substitution
When remote control batteries are
exhausted, the display will show the
message "Batt". In order to replace the
transmitter battery, open the back cover,
remove the spent battery and introduce a
new one (CR2430 3V Lithium).
40
or
push-button.
N° REVISIONE
DESCRIZIONE:
S.B.
DIS.:
MATERIALE:
ing. G.Nicolosi
APPR.:
TRATTAMENTO:
08.02.13
DATA:
CLIENTE:
Disegno
di
proprietà
della
Pellini
N° REVISIONE
DIS.:
ing. G.Nicolosi
APPR.:
08.02.13
DATA:
Disegno
for rai-
11
DESCRIZIONE
Telecomando radio
S.p.A..
Vietato
esporlo
o
riprodurlo
senza
DESCRIZIONE
DESCRIZIONE:
Telecomando radio
S.B.
MATERIALE:
TRATTAMENTO:
CLIENTE:
di
proprietà
della
Pellini
S.p.A..
Vietato
GB
or
DATA
DISEGNO:
SL2392
Pag. 1 /3
±0.2
TOLL. GEN.:
SCALA:
autorizzazione.
DISEGNO:
TOLL. GEN.:
SCALA:
esporlo
o
riprodurlo
senza
auto
7
Werbung
Inhaltsverzeichnis
