Pekatherm F70 Benutzerhandbuch Seite 15

•
This product has no parts intended to be repaired or replaced by the user. If any
part of the product fail, or the product does not perform properly, or there Is any
other kind of anomaly, do not attempt to repair it and instead take the product to
an authorized service centre.
•
The appliance must be returned to the manufacturer or his agent if the fuse of
control unit has ruptured.
•
For any further information, please consult our customer service.
INSTRUCTIONS
F70 FOOT WARMER BOOT
The F70 is modern and attractive newly designed foot warmer combining different
materials and technical and design features to create a unique innovative product with
truly outstanding performance, setting it apart from other similar products on the
market.
Firstly, a double zip on the front of the boot enables it to be fully opened, so feet can be
placed inside comfortably and for easy cleaning of the inner part.
Secondly, the inner heating element has been placed inside a soft, comfortable
removable cushion, so that it can be used as a heater inside the boor or as a standalone
heating device, adding to the product's potential uses in the home-
Finally, has special design of the F70 heating boot, with its thick layer of thermal
insulation between the wearer's feet and the floor, an its unique magnet closing system
between the legs to prevent heat loss, together with is superior heating power and
unique fast heating technology – which comes as standard in other PEKATHERM product
– greatly enchases the product's performance and effectiveness, for maximum comfort
and wellbeing.
Technical characteristic:
Model
Application
Measures
Finish
Power
Fast-heating
Maximum temperature
Temperature settings
Material
Power supply
*Measures collected in specific laboratory conditions.
F70
Feet
31x31x30cm
Cloth
110W
YES
60°C*
4
Polyester
230VAC 50Hz
15