Ⅳ Screen Interface; Ⅰ Home And Auto-Level The Heated Bed; Ⅱ Preheat - Kywoo3D Tycoon IDEX Benutzerhandbuch

Ⅳ
Screen Interface
Click to set nozzle 1/2 temperature
22°
Settings

Prompt Message
08
Click to set the hot bed temperature
00.00
printing time
Click to adjust fan speed
22° 48° 0%
printing speed
0% 0.00m
X Y Select file to print
Z
Click to move the axis
Media Removed
Ⅴ
Use the 3D Printer
ⅰ Home and Auto-level the Heated Bed
1. Turn on the 3D printer, click the coordinate box, click "
2. Click " " to auto-level the printer. (Note: the printer needs to be auto-leveled whenever the nozzle or the printing bed is
exchanged.)
00.00
240
E+
Y+ Z+
②
22° 22° 48° 0% E 0 Z
X- X+
0% 0.00m
Z-
240
①
Y-
E+
0
③
X X Y Y -000
Z Z
10 mm
Media Removed
ⅱ Preheat
Back to the home page. Click the "nozzle" and "hotbed" icons above, and adjust the preheating temperature by dragging the slider.
For your reference: the preheating temperatures of PLA filament are 200 for nozzle 55 for hotbed.
00.00
Nozzle1
200
22° 22° 48° 0%
0% 0.00m
X X Y Y
Z Z
Media Removed
→
" and wait for all the axes homed.
X Y
Z
Nozzle2 Bed
200 55
09