Ⅰ Notes; Introduction - Kywoo3D Tycoon IDEX Benutzerhandbuch

Ⅰ
Notes
1. After unboxing, please check whether the machine is damaged, bent, or scratched, and check the parts against your order. If you
have any questions, please promptly contact our after-sales service via the Kywoo 3D official website or the email address provided on
the manual.
2. Do not use the printer for anything other than described herein in order to avoid personal injury or property damage.
3. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust
environment.
4. Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.
5. Please use the recommended filaments to avoid the blockage of the extruder and damage to the machine.
6. Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.
7. Do not touch the nozzle or printing surface during operation as they may be hot. Keep hands away from machine while in use to
avoid burns or personal injury.
8. Do not wear gloves or loose clothing when operating the printer. Such clothes may become tangled in the printers moving parts
leading to burns, possible bodily injury, or printer damage.
9. After printing, use the provided tools to clean up any filament on the nozzle while it's still hot. Do not touch the nozzle directly with
your hands.
10. Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing
plastics or any other material off the frame, guide rails and wheels. Use glass cleaner or isopropyl alcohol to clean the print surface
before every print for consistent results.
11. Children under 10 years of age should not use the printer without supervision.
12. This machine is equipped with a security protection mechanism. Do not manually move the nozzle or printing platform while
booting up, otherwise the device will automatically power off for safety.
13. Users shall comply with related national and regional laws, regulations and ethical codes where the equipment or prints produced
by it are used, and users of our product shall not use aforesaid products to print any end-use products, objects, parts or components
or any other physical prints that violate the national or regional laws, regulations and ethical codes where herein referred product and
produced prints by it is located.
02
Ⅱ

Introduction

Gantry
Frame

Filament
Detector

Feed-in
Knob

Nozzle
Cleaning
Brush
Hotbed
Base
Frame

Reset
Switch

Touchscreen

Storage
Card
Slot


USB
Port


Nozzle
1


Nozzle
2


03