Introduction; Safety And Warnings - Uniks Rapid Pro Bedienungsanleitung

INTRODUCTION

Congratulation for purchase Rapid Pro, the first multifunction tester in the shape of
a socket tester.It allow the test of electrical system according the IEC standard as
the common installation tester do.In addition to the TRMS Voltage measurement
and the Socket Tester features allow Installation test to be performed from anyone
( RCD, LOOP L-PE ) in according to IEC61557-3 and IEC61557-6. Super bright color
Display TFT 1,77" With internal memory for store results. SuperCap technology let
the instruments turn on even when disconnected from the socket

SAFETY and WARNINGS

Attention: Follow the instructions given in the manual; improper use
could cause damage to the instrument or create dangerous situations for
the operator.
High Voltage Danger: risk of electric shocks
This products is manufactured following IEC/EN61010-1, guidelines for
safety installation testers.Follow this user manual for avoid damage the
instruments :
• Do not measure in high humidity or wet enviroment.
• Avoid measurement in highly flammable place.
• Avoid contact with the circuit unders test if you are not measuring
• Avoid contact with metallic part that can be under voltage
• If the instruments look broken or damaged please avoid the use for measure.
Maximum Voltage input is 265 V .Do not connect the instrument to higher voltage .Permanent
damage to the instruments and electrical shock can occur
if you don't respect this guidelines
4