Mem Memory / Report - Uniks Rapid Pro Bedienungsanleitung

MEM Memory / REPORT

The instruments automatically save RCD and LOOP measurement in MEM area.
Press FUNC button for enter MEM page. Press
saved data or press
It will be possible to store 64 consecutive measures.
By pressing the RED button you can generate a QR CODE for the generation of
REPORTS (Fig. 12). The 64 positions can be organized in chronological order. The last
measurement will always be saved in the first free CELL in ascending order (1... 64)..
surement for day of use . Last measure will be saved in the first Memory Slot free
(1...64) or in the last cell if memory is full scaling all the other.
Fig. 12
Fig. 13
simultaneously to clear the memory.
REPORT CREATE
Press the RED button
Scan the QR CODE with your smartphone using
the RAPID PRO REPORT APP.
All saved measurements will be included in a
REPORT with the possibility of exporting in pdf
or csv
Download the RAPID PRO APP
Android systems.
MEMORY
Column N ° indicates the measurement number
(Fig. 13).
The FUNC column indicates the saved
measurement with its settings.
The Value column indicates the outcome of the
measurement.
The result of the RCD measurement is indicated:
GREEN if the result is OK
RED if the result is NO OK.
button or for move through the
to generate the QR CODE.
for iOS and
13