Candy CI633C/E1 Bedienungsanleitung Seite 13

b) Setting the timer to turn one cooking zone off
Touching the heating zone selection control that you want to set
the timer for. (e.g. zone 3#)
In short time, before the display stops flashing, touch the timer
control. The minder indicator will start flashing and "10" will show
in the timer display.
Set the time by touching the "–" or "+" control of the timer
Hint: Touch the "-" or "+" control of the timer once will decrease
or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer will decrease or
increase by 10 minutes.
To cancel the timer
Select the zone by touching the heating zone selection control. In
a short time, touch the timer control.
Touching the "-" and "+" together, the timer is cancelled, and the
"00" will show in the minute display.
When the time is set, it will begin to count down immediately. The
display will show the remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
When cooking timer expires, the corresponding cooking zone
will be switched off automatically.
Other cooking zone will keep operating if they are turned on previously.
The pictures shown above are for reference only, and the final product shall prevail.
Set one zone