Red Sea PSK DC-1200 Benutzerhandbuch Seite 11

When the skimmer is assembled, insert the Skim-sensor into the
mounting holes located in the DC skimmer lid. The long probe is the neck
sensor and should be inserted in the hole in the inner recessed part of
the lid. The short probe is the cup sensor and should be inserted in the
hole in the upper surface of the lid.
Thread the sensor cable as required to reach the RRDC but leave about
50cm / 20" of loose cable near the skimmer for ease of maintenance.
To avoid false full-cup alerts, orient the lid so that the cup sensor is not
directly above the foam view window of the collection chamber.
Red Sea REEFER DC-Skimmer
TM
ENG
11