Checking The Status Using The Led Indicator; Charging The Battery - Dogtra iQ Plus+Duo Bedienungsanleitung

6. CHECKING THE STATUS USING THE LED INDICATOR

When the receiver/collar is on and ready
to operate, the LED flashes every 4
seconds. The LED will glow steadily on
both handheld transmitter and receiver/
collar while any buttons are pressed.
The LED color indicates battery life level.
44
Green = full charge
Amber = medium
Red = needs charge
If you continue to operate the unit when
the LED is red (needs charge), it will shut
down.

7. CHARGING THE BATTERY

1. Remove the rubber plug temporarily
and plug in the charger.
2. Plug the adapter's power plug into a
standard AC wall outlet. The LED will
glow red.
3. When charging is finished the LED
will glow green. Unplug the adapter's
power plug from the AC wall outlet and
disconnect the charger from the unit.
4. Place the rubber plug back in the
battery charging receptacle.
* The receiver/collar is still fully
waterproof even if the rubber plug is
not closed, but place the rubber plug
in the battery charging receptacle to
make sure dirt does not get inside.
* To charge multiple receivers/collars
and a transmitter, combine additional
battery charger splitter cables as
shown.
45