Teufel REAL BLUE NC Kurzanleitung Seite 3

EN – 3
Pairing
1. First time use: Press and hold the power button for
Bluetooth Pairing Mode is entered automatically and you see the LED fast flashing blue.
2. Enable the Bluetooth of your device to search and pair with a new device "Teufel REAL BLUE NC", the LED
solid on blue for 10 seconds after successfully paired.
3. Connecting with a new device: With your headphones turned on, double press the power button
the LED will fast flashing blue for Bluetooth Pairing.
ShareMe
ShareMe allows music sharing with two pairs of headphones. When your headphones are connected via
Bluetooth, please follow these steps:
1. Press the Power Button 1 and Center Button of the Joystick 5 simultaneously.
2. Start ShareMe on the other device you want to connect to, by also pressing the Power Button 1 and Center
Button of the Joystick 5 simultaneously.
3. The LED on both devices should quickly flash purple and connect automatically.
2 seconds to switch on your headphones.
,