Maono AU-WM730 Benutzerhandbuch Seite 17

Transmit power set up: L/H
The transmit power needs to be set on the transmitter. Constantly press the "function
•
key" until the screen display L or H symbol flashing
Press the "Left / Right Button" to select high or low power.
•
Press the "Function selection key" again to confirm and complete the power
•
adjustment.
Power mode display
Note
Select the high-power "H" mode, the working range will increase, but at the same time, it will
consume more power. Please pay attention to the battery status and replace it in time to
avoid power shortage. It is recommended to tun on low power "L" mode for use in
circumstances of small distance without obstacles, which is beneficial to prolong the battery
life.
17