Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MAIN COMPONENTS
1. Spray nozzle
2. Cover
3. Steam adjustment button
4. Spray button
5. Steam shot button
6. Power cord and plug
7. Base
8. Indicator light
9. Temperature control button
10. Water reservoir
11. Soleplate
PRIOR TO FIRST USE
•
Ensure that all stickers and labels
have been removed from the
soleplate (11).
•
Some parts of the appliance were
oiled during manufacture and these
will therefore smoke slightly when
the iron is first used. This is not
dangerous. Allow the appliance to
heat up and iron a piece of damp
cloth until the soleplate is completely
clean.
•
The first few shots of steam should
not be directed towards clothing,
as the steam may contain material
particles left over from the production
process.
REFILLING THE WATER
•
Remove the plug from the socket.
•
Turn the steam quantity button (3) to
position 0.
UK
4
3
2
1
•
Open the cover (2) on the nozzle for
water refilling and carefully fill with
tap water until the water level has
reached the MAX mark on the side
of the appliance. Never fill past this
mark. The appliance can hold 160 ml
of water.
•
Never use chemically distilled water
or perfumed water. Close the cover.
•
Always pour the excess water away
after use.
ADJUSTING THE
TEMPERATURE
•
Read any ironing instructions on the
garment. As a rule, there will be a
pictogram of an iron and a number
of dots. These dots indicate the
setting that should be selected on the
appliance's thermostat dial (9). See
table below.
Material
Symbol
Synthetic,
silk
Wool
Cotton,
linen
33
5
6
7
8
9
10
11
Tempera-
ture
•
Low
••
Medium
•••
High
Werbung
Inhaltsverzeichnis
