Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
the pipe from metal residues�
Connect the "Water" pipeline to water mains and install a shut-off valve
and a filter on the pipe.
Ensure that the shut-off valve is positioned so that it can be easily
operated by the operator at any time�
Attention: if the water supply pipe malfunctions, it should be replaced
with a new one while the old broken one should not be used again�
1.4
Connection to the drain
Fig. 4
1.5 Electric connection
As prescribed, the electrical system must have an efficient earth
system, as required by the regulations in force� The electrical safety of
the appliance can only be ensured when the electrical system is conform�
Before making the electrical connection, check the mains voltage and
frequency values to ensure that they conform to the requirements of the
appliance, as indicated on its information plate (Fig. 5)�
For direct connection to the mains, a device, sized according to the
load, must be placed between the
appliance and the mains itself, which
ensures disconnection� Its contacts
should have a minimum opening
distance
that
disconnection under the conditions
category
III
according to installation rules; this
A
enables
complete
overvoltage,
The oven is equipped with a
water drain; this device is placed
at the bottom of the rear part of
the appliance and has a tube with
diameter of 32 mm�
Connect the pipe that projects
from the drainage device (Fig. 4,
ref. A)� It is, however, advisable
to connect the pipe to an open
funnel�
MOD EPM 0511 E NR
3N 400V AC 50 HZ
POWER SUPPLY
6,3
TOT. POWER kW
000000/01/16
IP
of
Fig. 5
11
Werbung
Inhaltsverzeichnis
