AN Collection BETA Montageanleitung Seite 8

The shelving unit / carcass must
4
be positioned. Look for the point
where the floor is highest; starting
from here, wind out the adjustable
feet of all the carcass sides until the
entire shelving unit is level.
Pages 15 – 16
Now the built-in parts such as shelves,
5
drawers, clothes rails, etc. are mounted.
This does not apply to built-in parts in the area
of the door hinges. These are fitted after the
doors have been installed and aligned.
Pages 17 – 51
At the end, mount and position
6
all swing doors and flaps if they
are available.
Pages 52 – 59
7