Connecting To An Audio System Via Hdmi Earc; Connecting To An Audio System Via Optical Audio Cable; Connecting To An Audio System Via Analogue Audio Cable; Connecting To The Mains Supply - Loewe We. SEE 55 Betriebsanleitung

We. SEE | User Manual (part 2 of 2)
Connecting to an audio system via HDMI eARC | Connecting to an audio system via analogue audio cable
Connecting to the mains supply | Getting started - first steps
Connecting to an audio
system via HDMI eARC
Audio System
HDMI ARC/eARC
HDMI2
Use an HDMI cable (not supplied) to connect HDMI
eARC socket of the TV set to the HDMI ARC/eARC
socket of an audio system or soundbar. It is recom-
mended to use a cable marked as „Ultra High-Speed
HDMI Cable" with a Type A connector.
Ultra High Speed HDMI Cables are designed to sup-
port the new eARC feature in addition to the highest
resolution video modes. The Standard HDMI Cable
with Ethernet and the High Speed HDMI Cable with
Ethernet will also support eARC.
Connecting to an audio
system via optical audio cable
Before making this connection, ensure you removed
plastic protection caps from the cable connectors.
TV set
Audio System
OPTICAL
Connect the audio output of the TV labelled TOSLINK
to the digital audio input of an audio system.
Connecting to an audio sys-
tem via analogue audio cable
TV set
TV set
Analogue ampli er
AUDIO IN
L R
Use a stereo cinch/jack adaptor cable to connect the
audio output AUDIO OUT to the analogue audio input
of the audio system.
Connecting to the
mains supply
Connect the TV set to a 220-240V mains socket.
Plug the mains supply cable into the mains supply
connector (AC IN) of the TV and guide the cable out
of the TV as shown on the picture below.
14
Connect the mains supply plug of the mains supply
TOSLINK
cable to a power outlet.

Getting started - first steps

Before starting the TV for the first time, make sure
that you have completed the connection of your
external devices and that the TV is connected to the
power supply.
1. Press the (Standby) button on the remote
control to turn on the TV.
2. You will be welcomed by the Installation wizard
AUDIO
OUT which will help you to set up the TV set in a few
simple steps.
To navigate in the Installation wizard:
• Use the arrow buttons to select the
desired item.
• Press the OK button to confirm the
selected item.
• Press the
step.
STEP 1 – Select the language
– Connecting to the internet
STEP 2
Optional step. If you wish to skip this step, press the
right arrow button.
If you have connected the TV to your home network
with an Ethernet cable and your network configura-
tion allows DHCP, you will be automatically connected
to the Internet.
Alternatively, you can use Wi-Fi connection. You
must first select your network from a list of available
networks. You will then be prompted to enter your
Wi-Fi password. You can do this by typing on the
on-screen keyboard.
button to go back one
20 20