Inhaltsverzeichnis; Standard Accessories - i-PRO WV-S85702-F3L Installationsanleitung

Standard accessories

Important Safety Instructions ............................. 1 pc.
Attachment plate* 1×
1
Sun shade 1×
Template 1×
*1 The attachment plate and the RJ45 Ethernet cable for easy kitting are attached to the camera.
Other items that are needed (not included)
⿟Mounting screws
Installation method
Directly mount the camera onto the installation surface
Mount the camera to a two-gangbox/junction box.
Mount the camera using the exclusively designed mount
bracket.
*1 Select screws according to the material of the location that the camera will be mounted to. In this
case, wood screws and nails should not be used.
*2 This value indicates the minimum pull-out strength required value per screw. For information about the
min-imum pull-out strength, refer to our technical information website <Control No.: C0120>.
*3 The screw length is an example when installing the camera on a robust installation surface with a
thickness of 20 mm {25/32 inches} or more.
⿟Ethernet cable with RJ45 plug (category 5e or better, straight, all 4 pairs (8 pins))
Cable cover 1×
Bit 1× (Hex wrench,
screw size 6.35 mm
{1/4 inches} T20)
Conduit cover 1×
RJ45 cap1×
Recommended
screw
M4 × 16 mm
{5/8 inches} × 4 pcs.*
Refer to the operating instructions of each
bracket.
6
Grommet 2×
(of them, 1 for spare)
Conduit base 1×
RJ45 Ethernet cable for
easy kitting* 1×
1
Minimum pull-out
strength
*1
196 N {44 lbf}
3
*2