Dipswitch Settings (Hybrid Only); Eco/Ups Function - pro user PSI-Serie Bedienungsanleitung

REMOTE CONTROL DISPLAY MPPT SOLAR MODE (HYBRID ONLY)
A
B
A) Battery Indication
B) Battery voltage
C) Solar panel connected
D) AC output running
E) Power consumption
F) AC output voltage
G) Inverter operating
The battery charger function is set using the dip switches on the side of the inverter. The
diagram below shows how to set them. When in doubt about which setting you need, please
contact your battery supplier.
ECO/UPS FUNCTION (1000/1500/2000/3000W)
The inverter is equipped with ECO (energy saving) and UPS setting. In ECO mode,
consumption from the battery is preferred. This way, no external incoming voltage is applied
as long as there is su cient capacity from the battery. If you choose the UPS mode (default
setting) then external incoming 230V AC voltage is preferred (bypass). In UPS mode, the
battery is selected when no external incoming voltage is available.
To switch from UPS to ECO or vice versa, press and hold the power button for 2 2 2 2 seconds.
C

DIPSWITCH SETTINGS (HYBRID ONLY)

11
D
E
F
G