Reflexion LEDX22I+ Bedienungsanleitung Seite 60

DVBC Manual Search
5V Antenna Feedback
Channel Edit
CI Information
Signal Information
FUNCTION
In the function menu you can adjust and save various general settings to suit your needs.
1. Press the [
2. Select the "Function" menu item with the [
3. Press the [ ] key to enter the "Function" menu.
4. The following menu items are available in the "Function" menu:
Network ID: Only available for Network and Advanced
Scan.
 Auto
 Manual selection
LCN-Option: Set the LCN option "On" or "Off". It is
recommended to set it to "Off", otherwise the yellow
button in the "Edit Channel" menu is disabled.
Search: Starts the search.
Starts the manual channel search. The channels are
appended to the channel list.
Frequency: Set the frequency.
SymbolRate: Is fixed to Auto.
Search: Starts the search.
Signal Quality: Displays the signal quality.
Signal Strength: Displays the signal strength.
Set the 5V supply voltage for external antennas at the
[DVB-T2/C] connection "On" or "Off".
Edit the channel list.
Red button: Delete a selected channel.
Yellow button: Move a selected channel to the desired
position.
Blue button: Skips the marked station when switching
through.
:Marks the selected station with a heart. Press
[ ]
the button again to stop favouring the channel.
Press the [
the Favourites list.
Displays information about the inserted CI module and
card. Only active if a module is inserted. The module and
card are not included in the scope of delivery and must
be purchased separately from the reception provider.
Displays reception information of the selected station.
Only active when a station has been found.
] key to open the TV menu.
] key when the menu is closed to open
, ] keys.
60
UK