Pipe Connections - ThermoFlow DS 10 U Bedienungs- & Installationsanleitung

5.1.4 Pipe connections

NOTE: The pipe diameter is G 1/2" in all parts.
- Connect the pressure relief valve to the electric water heater inlet.
- Add the rubber gaskets supplied with the electric water heater at the end of the threads to ensure
there are no leaks from the joints.
4
2
5
1 - Power cord
2 - Hot water outlet
3 - Cold water inlet
4 - Rubber gaskets
5 - Mixing valve adjustment knob
6 - Cold water inlet connection fitting
7 - Pressure release hole
8 - Pressure relief valve
9 - Hot water
en-20
4
3
8
7
6
9
5
9
6
7
2
4
8
3
4
1
Fig. 5.3