Lightmaxx Vector Fog 2.5 Bedienungsanleitung Seite 22

Volume (Continuous Mode)
Press the VOLUME button, to activate continuous fog output. The display indicates Volume
followed by the value that was set in menu item "Volume Out":
To stop the fog output, press the Stop button.
Remote control mode:
The device can be managed remotely using the remote control included in the scope of delivery.
To do this, plug the wireless receiver into the connection on the rear of the unit. Please note that
the device cannot be controlled by remote control if it is connected to DMX.
The remote control has 2 buttons: Press the "A" button to trigger a permanent fog emission. To
stop the fog output, press button "B".
Duration xxx s
ENGLISH