Set up:
Connect the product to the power supply and then turn it on. Wait until the heating element has
reached the operating temperature. 5. It requires about 7 minutes for heating up. When the
process of heating up finishes, the LCD display will show "READY TO FOG".
The control is now carried out either by DMX, remote control or by operation on the device itself.
Display and menu buttons:
The device has 4 operating keys and an LCD display on which all settings can be addressed and
read.
Button
Menu
Timer/
Up
Volume/
Down
Stop
Function
Interval Set
(5-200sec)
Duration Set
(5-200sec)
Timer Out
(1-100%)
Volume Out
(1-100%)
Wireless
On/Off
DMX Add
(001-512)
Fluid sensor on/off
Up/Activate Timer function
Down/Activate Volume
function
Stop/Exit
ENGLISH
Description
Timer-mode-setting