Example Of Assembly - STG-BEIKIRCH MZ2 DGM Technische Information Und Bedienungsanleitung

Pressurized gas module MZ2 DGM

Example of assembly

Smoke vent
e.g. domelight 170° with thermic electrical control (pressurized gas generator).
This is a construction recommendation. Please observe the particular regulations, i.e. several
SHE manual call points and smoke detectors could be required.
Before assembly, installation and any modification switch the slider switch to "secured".
Before attachment of the compressed gas generator cables these are measured for "continuity" using
an ohmmeter. The internal resistance should be 1.0 to 1.6 ohms per compressed gas generator.
No ignition up to 0.18 amp!
mm
uslöseeinrichtung zum
linder
mm from releasing
eumatic lift cylinder
Pipeline
steel 6 x 0.7 mm
from releasing
device to pneumatic
Melder
lift cylinder
detector
ungslänge beachten!
max. cable lenghts!
e, max. 10 Stück
point, max. 10 pieces
22
Connecting cable, please observe max. cable lenghts!
Smoke vent
domelight
autom. detector
Connecting cable, please observe max. cable lenghts!
SHE manual call point,
1,40 m
Pneumatic lift cylinder
Connecting cable, please observe max. cable lenghts!
SMOKE VENT
max. 10 pieces
Releasing device:
pressurized gas
generator with CO
bottle
autom. detector
Mains
supply
230 V AC
SHE contol panel
03/24999655
Ansch
Conne
Auslöseeinrichtu
Druckgasgenera
mit CO -Flasche
2
Releasing devic
pressurized gas
with CO bottle
2
2
auto
auto
Anschlussleit
Connecting c