Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

OPTICAL MODE

Use this operating mode to play music from the optical digital
input for example from a TV on your soundbar (A). The TV must
have an optical digital output. Use the optical cable supplied to
make the connection.
Proceed as follows:
• Connect the optical cable to the optical digital output of your
TV.
• Then connect the optical cable to the optical digital input of
your soundbar.
• Switch the TV set and sound bar on. Set the connected TV to
"PCM Stereo" or "Stereo 2.0". • Start playing on the TV.
• Press "INPUT" button on the sound bar or on the remote
controller to select the OPTICAL mode to open optical digital
input of your sound bar. After successfully connected, the LED
display will show . Movie or music that you selected will be
played on through sound bar and TV.
• You can use the volume buttons to adjust the volume to your
requirements.
• If you wish, you can change the audio settings by using the
relevant buttons on the remote controller.
HDMI (ARC) MODE
1. The Soundbar supports ARC with Audio Return Channel
ARC. lf your TV is ARC compliant, you can hear the TV audio
through your Soundbar by using a single ARC cable
2. Using a High Speed ARC cable, connect the ARC connector
on the soundbar to the ARC
connector on the TV. The ARC connector on the TV might be
labelled differently. For details, see the TV
user manual.
3. Press "INPUT" button on the sound bar or on the remote
controller to select the ARC mode to open optical digital input of
your sound bar. After successfully connected, the LED display
will show . Movie or music that you selected will be played on
through sound bar and TV. You can use the volume buttons to
adjust the volume to your requirements.
4. If you wish, you can change the audio settings by using the
relevant buttons on the remote controller.
PLAYING AUDIO VIA AUDIO INPUT (AUX) CONNECTION
Connect the sound bar to your PC, tablet, smartphone, TV, or
other device by using the included
audio cable. Then short-press the "INPUT" button on the sound
bar or on the remote controller to switch to audio input mode
with LED display lighting up
In this mode, playback can only be controlled on your
connected device
Note: For some computer, you may need to access the audio
control panel to manually set the sound bar as above picture.
KEEP THIS INSTRUCTION MANUAL FOR REFERENCE AS
IT CONTAINS IMPORTANT INFORMATION.
NL / EN - support@alleenonline.nl
BE / FR - support@alleenonline.be
SPECIFICATIONS
Soundbar size:
Subwoofer size:
Surround size:
Bluetooth Version:
Bluetooth Range:
Audio output:
Input:
Power output:
Input Impedance:
Driver Unit:
Frequency Response:
© 2021 The Investment Company Europe B.V.
HYUNDAI logos are trademarks of HYUNDAI Corporation
Licensed to The Investment Company Europe B.V. All rights
Imported / Distributed by The Investment Company Europe B.V.
Exclusively developed for sales in Belgium, the Netherlands and
The artwork and design of this package are protected by
European copyright law and may not be reproduced, distributed,
displayed, published or used for any purpose without prior
written permission. It is not permitted to alter, or reproduce any
trademarks or copyright notice from this package.
Licensed by HYUNDAI Corporation Holdings, Korea
72.5 x 81.5 x 90 cm
39 x 33.5 x 19 cm
19 x 8.15 x 7.25 cm
5.0
Up to 10m
5.1 CH
Aux
USB
Bluetooh
Optical
HDMI(ARC)
30W*5+60W = 210W R.M.S
8Ω*5+4Ω
2.5'*2+2.5'*1+2.5'*2 + 6.5' SW
45Hz-20KHz
Holdings, Korea.
Luxembourg.
PATENT PENDING
reserved.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis